Baton Sleep Review: Good Bed, Value for Money Bed Frame

Baton Sleep is an online retailer of beds in Singapore. It adopts a similar online strategy like US online retailers (e.g. Casper) and competes against others like Noa Sleep, Haylee, and Wonderbed. You know everyone’s copying everyone when each retailer uses the same website design, pricing strategy, and “review” page. Check their websites out yourself. We eventually chose Baton Sleep because we received a good review from a trusted source. Having slept on the bed for around 2.5 months, we now have a good gauge of how good our bed is to write our Baton Sleep review. If you want to see a general guide for buying a bed, head over to our article instead.

But first we need to caveat this guide. It is purely written from our perspective, so our experience may vary from others’. And there are no affiliate links here, this is purely an honest review. Calling a spade a spade. If the product is lousy, then we’ll surely call it out.

Our caveat done, let’s begin.

How do you pronounce Baton?

Before we begin the substantial content, we need to detour a little into pronunciation. We’ve heard the customer service officers butcher the brand name by calling Baton “Bay-ten”. They continuously mispronounced it even when we subtly pronounced the name completely differently, like in a “do you mean Baton Sleep” way. It’s an injustice to the brand, its founders, its staff, when its own people can’t pronounce the name correctly. If anyone from Baton Sleep is reading this – make sure everyone pronounces your brand name properly!

For the record, it’s probably ok to pronounce it as “Ba-tawn” or “Ba-ten”. Here’re 3 videos for research purposes.


We bought a Queen bed and storage bed frame

We bought a Queen size hybrid bed and a stash storage bed frame. In gray.

The Baton Sleep "Stash" storage bed frame. Ignore the bed sheet and pillow cases, no one deserves to see those, in this combination.
The Baton Sleep “Stash” storage bed frame. Ignore the bed sheet and pillow cases, no one deserves to see those, in this combination.

You’ve got to appreciate it when bed retailers do crazy stuff like jumping on beds with wine or Uno Stacko on it, it shows crazy (perhaps fake) confidence. Baton Sleep did that, the video’s below. Such gimmicks are good for leaving lasting brand impressions. Who can forget Simmons using a bowling ball and pins to show how their pocketed coil system absorbed shock?

Our purchase of the Baton Sleep bed seemed risk-free. They offered a 30 nights refund policy. That seemed fair enough. This is not to say they’re industry leading, because they really aren’t. Noa Sleep, Haylee, and Wonderbed offer a 100 nights trial. So Baton Sleep provides less than 1/3 the trial duration. Nevertheless, we bought Baton Sleep. Because a good review from a trusted source is worth a lot. They can all pimp their review pages, and those do seem pimped up (check out their reviews page). If they make us their marketing heads, we’d totally get rid of these fake looking reviews and just get the installers to take photos with the clients or the beds. You know, like how other retailers with Facebook pages do it. Genuine, authentic feel. But that’s besides the point, we’re not here to save the world.

An example of reviews. Not saying these are fake, but does the review from Chris V convince you after the guy said "Finally, I'm able to have a good deep sleep throughout the night,"? For us, definitely no.
An example of reviews. Not saying these are fake, but does the review from Chris V convince you after the guy said “Finally, I’m able to have a good deep sleep throughout the night,”? For us, definitely no.

Buying online was easy and cheap

You can buy Baton Sleep mattresses at their Comfort Design showcase. But we bought our Baton Sleep bed during their sale online. SGD 100 off. This meant that our Queen size hybrid bed costs SGD 850. We paired it up with the storage bed frame, which came in grey and fit our theme perfectly. The process was easy. Go online, make sure click the item and quantity, fill in your address and credit card details, and you’re done. We followed up by emailing to request for a later delivery date, which was easily arranged. So far so good. To top it off, we used our OCBC 365 card to accumulate cashback. Got to earn that sweet cashback. Ka-ching.

Installation

On the day of installation, we came back to find that the Baton Sleep guys were earlier by half an hour. They were waiting outside for us when we came back. Poor guys, their admin people must have over-catered travel time for them. The installation, told through pictures:

They came with a relatively small trolley of stuff. Then again, that's normal because the mattress is vacuum packed.
They came with a relatively small trolley of stuff. Then again, that’s normal because the mattress is vacuum packed.
The guys unpacked the stuff outside and brought them in.
The guys unpacked the stuff outside and brought them in.
First step was laying out all the pieces of the storage bed frame.
First step was laying out all the pieces of the storage bed frame.
More pieces coming into the picture.
More pieces coming into the picture.
The headboard being brought in.
The headboard being brought in.
Preparation would then be done to fix all these pieces together.
Preparation would then be done to fix all these pieces together.
The side of the bed frame came on.
The side of the bed frame came on.
The guys laid the planks on top, and once everything was ready they unpacked the bed onto the bed frame. I think PQ was trying to communicate to help them manage the rolling out of the mattress.
The guys laid the planks on top, and once everything was ready they unpacked the bed onto the bed frame. I think PQ was trying to communicate to help them manage the rolling out of the mattress.
Our Baton Sleep bed installed, complete with a surface layer of plastic.
Our Baton Sleep bed installed, complete with a surface layer of plastic.

The installation wasn’t fantastic. There was a big gap at the side of the bed, which couldn’t be covered by our temporary bed sheet. The laminate of one of the drawers looked like it was poorly glued. And one of the wooden plank looked chipped and fragile.

We tried to make the gap at the side smaller, but this was the smallest we could achieve on both sides. It couldn't be covered by our bed sheet.
We tried to make the gap at the sides smaller, but this was the smallest we could achieve. It couldn’t be covered by our bed sheet.
The laminate for one of the side drawers was also poorly stuck. It felt a little like excess paper that got glued onto the surface anyway.
The laminate for one of the side drawers was also poorly stuck. It felt a little like excess paper that got glued onto the surface anyway.
One of the plank was chipped and looked like it'd break anytime. We're not heavy, but that is not reassuring.
One of the plank was chipped and looked like it’d break anytime. We’re not heavy, but that is not reassuring.
We also spotted many creases on the bed surface, but those are thankfully normal.
We also spotted many creases on the bed surface, but those are thankfully normal.

Installation – 2nd try

It wasn’t good enough to have such a large gap. So Baton Sleep’s guys came down to rectify it. The guys really tried very hard to push the bed frame and the planks together, so much so that they leaned against the wall and used their feet to push the sides of the bed. Bonus points for effort, but because our bed frame is cloth-based, we must deduct major points for putting their feet on the cloth.

Unfortunately, the rectification caused more problems. While the gap was indeed smaller, the gap because non-uniform. Some parts curved out. The drawers also weren’t aligned, probably because the frame was forcefully adjusted.

The gap became much smaller, and this was far better than the original attempt.
The gap became much smaller, and this was far better than the original attempt.
However, if there's a gap, it should be uniform. But in our case the gap curved. This suggested that some wood pieces were misaligned.
However, if there’s a gap, it should be uniform. But in our case the gap curved. This suggested that some wood pieces were misaligned.
The drawers were also misaligned. This was the front, so it's more obvious than if the side drawers were the problematic ones.
The drawers were also misaligned. This was the front, so it’s more obvious than if the side drawers were the problematic ones.

Installation – 3rd try

At this point we were ready to just phone it in. Some part of us was screaming, “Change the bed and buy the Dunlopillo!” It was still within the free trial period, so we could do that. But we liked the bed, so we again got Baton Sleep’s guys down. We were told that another team of guys would be coming. This new team was supposedly more experienced than the previous one.

They started off correcting the misaligned planks.
They started off correcting the misaligned planks.
Turns out the planks couldnt be forcefully compressed.
Turns out the planks couldn’t be forcefully compressed.
The guys fixing the misalignment of the drawers. They had to work on it for around 20 mins, but eventually they did it to an acceptable standard.
The guys fixing the misalignment of the drawers. They had to work on it for around 20 mins, but eventually they did it to an acceptable standard.

This time, our bed was adjusted well in a way that minimised the gap at the sides while keeping the alignment of the drawers as straight as possible.

That said, we didn’t appreciate their internal communications. The servicing form which we had to sign off said that the rectification was done as the customer (us) was still not satisfied, rather than labelling it as the product being not up to scratch. It just made us feel like Baton Sleep thought that we were picky, which was not nice. But they apologised for it subsequently so we all moved on.

Baton Sleep bed is pretty good

Our misaligned bed was finally fixed. That wasted quite a few of our Saturdays staying home to welcome the Baton Sleep guys, but thankfully it was over. If there’s anything we learnt from home renovations, it’s that rectifications are a natural law like taxes. The saving grace was that we didn’t incur any cost.

Apart from the inconvenience, the bed is actually quite good. It’s a good buy. The bed is soft, but not too soft that you sink in completely. It still offers suitable back support, which is good because the both of us have some back issues. When one person gets onto the bed, the other person also hardly feels a significant disturbance. That’s a plus because we never get into and out of the bed at the same time. The bed doesn’t feel too warm either, which helps as we don’t need to turn on the aircon for that. More ka-ching $$$.

The best litmus test is that we sleep really easily in the bed and we look forward to sleeping in it. As a bed maker, that’s what you really want to hear from your customer, when your core product achieves its purpose.

The storage bed frame is good value for money, for the price and style. For that price you won’t be getting the best laminates or materials, so we weren’t disappointed due to unrealistic expectations. They provide additional storage room in a way that doesn’t add bulk to your room, so that’s always a plus. Moreover, we don’t have to lift up the bed to access the storage space (like other bed frames make you do), so the drawer design is great.

Too Long; Didn’t Read

We bought a Baton Sleep bed and storage bed frame. The bed is good – the right firmness, it’s cool to sleep on. The bed frame is good value for money. But the installation wasn’t good. 

Similar Posts

4 Comments

    1. In terms of comfort I think it’s good and we didn’t notice it when the 30-day trial ended. For the price we thought it’s good. Only thing is the mattress is smaller than the frame, so dust gets into the cabinets. The bed frame fits our theme well though.

  1. Hi, can I check which firmness did you get for the mattress? I have the hybrid one and I feel like we should have gotten the firm one. (i’ve been using it for about 3 years now)

    1. We got the hybrid and it was really the better choice. The firm one that we tried at the showroom was too hard!

Leave a Reply

Your email address will not be published. Required fields are marked *